| 1. | Ultrasonic machining mechanism of nd - fe - b ferrite magnetic materials
烧结永磁体材料的超声加工机理 |
| 2. | Non - traditional machine tools - terminology - ultrasonic machine tools
特种加工机床术语超声加工机床 |
| 3. | Abstract : frequency automatic tracking and amplitude stabilizing are two important characteristics of ultrasonic machining power
文摘:频率跟踪和恒定振幅控制是超声加工电源两个重要的特性。 |
| 4. | Numerical controlled ultrasonic machining is a method of completing 3d ultrasonic machining , which takes use of analog of numerical controlled milling
摘要数控超声加工是利用类似数控铣削的方式实现三维加工的超声加工方法。 |
| 5. | Based on the structure of ultrasonic machining transducer . by studying the principle , theory design and engineering design method of power transducer , the large amplitude transducer is designed and produced
摘要根据适应超声加工换能器的结构形式，通过研究功率换能器的工作原理、理论设计和工程设计方法，设计并制作大振幅换能器。 |
| 6. | The cnc system has been developed " , which makes the manufacturing of the engineering ceramics parts with three dimension complex shape possible , and can supply further research of technics law of ultrasonic machining with basic experiment condition
该数控系统的研制完成使加工三维复杂型面的工程陶瓷零件成为可能，为进一步研究超声波分层铣削加工的工艺规律提供基础实验条件。 |
| 7. | Engineering ceramic is used widely in many fields such as electronics 、 metallurgy 、 chemistry industry 、 machine 、 energy power 、 aviation and space - flight , but it is very difficult to machine , for principle , ultrasonic machining is one of the most potential technologies resolving difficult problem of engineering ceramic
工程陶瓷在电子、冶金、化工、机械、能源、航空航天等众多领域得到了广泛应用，可是它的加工却十分困难。 |
| 8. | The influences of the given speed , the size of the grain and the static load on the numerical controlled ultrasonic machining efficiency were discussed , the grey system theory was used to carry on the related analysis to these three factors , the main influence factors and secondary influence factors were found out , this can be used as the criteria in setting up the parameters in ultrasonic machining
探讨二维数控超声加工中工具移动速度、磨料粒度、静压力对超声加工效率的影响，运用灰色系统理论对这三个因素进行了灰关联分析，找出影响加工效率的主要影响因素和次要影响因素，为超声加工中参数的设置提供了依据。 |
| 9. | Abstract : experiments were made on a ultrasonic machining tool with work - piece adhered to ultrasonic transducer head , to machine micro - holes on hard and brittle materials such as soda glass and si , to study the effects of tool materials ， work - piece materials ， amplitude ， machining load ， slurry concentration ， tool length and the size of work - piece on machining rate and wear ratio . in this experiment , the micro - tool was made through wedg
文摘:通过以wedg放电加工手段制作微细超声加工用工具，在采用工件加振方式的微细超声加工机上对碳酸玻璃、半导体硅等硬脆材料试件进行微孔加工的实验，来探讨在某一特定加工条件下工具材料、工件材料、工件的振幅、加工静载荷、磨料悬浮液浓度、工具长度及工件尺寸等重要因素对加工速度、工具损耗率的影响，为微细超声加工技术的实用化提供参考依据。 |
